SPI Signal Splitter
Model No.: SA
DC5-24V/Dual Way Amplifier or Splitter
Features
● Split 1 Group SPI Signal (Data+Clock) to 2 Group SPI Signals.
● Used With SPI Controller, Applied to Synchronous Control Multiple SPI Digital RGB or RGBW LED Strips.
Technical Parameters
| Input and Output | |
|---|---|
| Input Voltage | 5-24VDC |
| Input Current | 0.5A Max. |
| Input Signal | 1 Group SPI (TTL) Signal |
| Output Signal | 2 Group SPI (TTL) Signals |
| Safety and EMC | |
| EMC Standard (EMC) | EN301 489, EN 62479 |
| Safety Standard (LVD) | EN60950 |
| Radio Equipment (RED) | EN300 328 |
| Certification | CE, EMC, LVD |
| Warranty and Protection | |
| Warranty | 5 Years |
| Protection | Reverse Polarity |
| Environment | |
| Operation Temperature | Ta: -30 °C ~ +55 °C |
| Case Temperature (Max.) | Tc: +85°C |
| IP Rating | IP20 |
Mechanical Structures and Installations
Wiring Diagram
● Connect With One SA
● Connect With More Than One SA
Note
● If the SPI LED Pixel Strip is Single-Wire Control, The DATA and CLK Output is Same, Each SA Can Connect up to 4 LED Strips.
● If the SPI LED Pixel Strip is Two-Wire Control, Each SA Connect up to 2 LED Strips.