Free Cut COB LED Strip
◆ CRI > 90
◆ Power :5mm(10W/M) 10mm(15W/M)
◆ DC 24V
◆ LED Qty : 320LEDs/m
◆ PCB width 5mm 10mm
◆ IP Grade : IP20 /IP65/IP67
◆ Color : 2700K / 3000K / 4000K / 6500K
◆ 3M Adhesive ,Customised services available
The COB LED strip is highly versatile and can be used in various different industries.
◆ Parking lighting
◆ Architectural lighting
◆ Shopping mall lighting
◆ KTV & KTV bar lighting
◆ Holtel renovation lighting
◆ Furniture & wine cabinet lightine
Advantage: | 1, Free Cut COB strip | 2, Free Cut COB strip |
Part NO: | COB065 | COB064 |
LED Qty: | 320pcs per meter | 320pcs per meter |
CRI (RA) | >90 | >90 |
PCB Width IP20: | 10mm | 5mm |
Input Voltage: | DC24V | DC24V |
Watts: | 14W | 10W |
Luminous Flux: | 110-120LM / W | 110-120LM / W |
Color: | 2700/3000/4000/6500K | 2700/3000/4000/6500K |
PCB color: | White | White |
IP Grade: | IP20 | IP20 |
Operating temperature: | .-25 to 45℃ | .-25 to 45℃ |
Beam angle: | 180 degree | 180 degree |
Certification: | CE; RoHS | CE; RoHS |
Max Run: | 5M | 5M |
Min Run: | 12.5mm | Free Cut |
The traditional COB strip is soldered to the PCB with flip chip, easy to dead light, can not do drip and waterproof type, the new generation of COB strip is a combination of COB and conventional strip, soldered to the PCB board with SMD led chip, make it more solid, not easy to fall off, can do any kind of waterproof type.
The brightness of the ordinary COB strip is only 100LM/W, while the brightness of the new generation of COB strip is 30% higher than the ordinary strip 110-130LM/W. The luminous efficiency, good colour consistency, wide luminous surface, the same reliability, linear lighting effect, soft and non-blinding.
Ordinary COB LED Strip
New upgrade COB LED Strip
The new generation of COB light strips can pass destructive testing.
Ordinary COB is difficult to undergo destructive testing, hot and cold shock testing, high temperature and high humidity testing, twisting and tensile testing.
4. Wide viewing Angle up to 180 degree.
COB led strip are 180 degree viewing angle. SMD LED Strip type is normally 120 degree viewing angle.
Put the chips on board then put Phosphor on chips let the viewing angle bigger, then it’s less dark zone
5. Excellent CCT uniformity for continuous orders.
With our experience engineer team. we can keep excellent CCT uniformity for continuous orders. and keep Color- Consistency: 3-Step SDCM.
Ensure your every orders same color, and continuouse provide super work for your customers.
We pay attention to every details, the connect cable we use 22AWG pure copper wire. Always keep 3/8”stripped off the end of the LED for wiring purposes.
Small increment LED strip allowing free cutting to desired length and minimal shadow
8. Waterproof type.
2018 COB LED Strip can be made into various waterproof levels.
(1)Non waterproof type
(2)Extruded Silicone waterproof
(3)Put in tube waterproof
1. Cut the COB on the cut mark.
2. Take the 3M tape out.
3. Put the strip with the connector and connect it together.
Box Size: 43*43*35cm 100 reels per box
Weight: IP20: 12KG
The full name of the COB led strip is: Chip On Board, which is a method of directly binding the LED chips to the PCB board.
Yes, COB LED STRIP can be cut.
Yes, it’s can be dimmable with dimmer controller.
This is determined by the difference in the manufacturing process of COB LED STRIP and SMD light strips. The production process of SMD led strip is to first produce SMD lamp beads, and then split each lamp bead, and make the light bead after light separation to achieve color consistency on the same board. The COB LED STRIP is to flip the chip on the PCB board, and then drop the phosphor to achieve white light. Without the steps of light splitting, there is no way to achieve the consistency of the SMD led strip.
Because the chips of the COB LED STRIP are too dense, it will affect the heat dissipation, so the power cannot be made too large, at most 14W per meter, and the SMD lamp beads of the SMD led strip have brackets, which can dissipate heat and can achieve 18W.
At present, the highest luminous efficiency of COB LED STRIP is: 120LM/W. SMD has a high-power lamp bead that can achieve 160-170LM/W. If the power requirement exceeds 120LM, you still need to choose a high-brightness SMD led strip.