Full spectrum grow light: This grow light strips can provide full spectrum from 380nm up to 780nm (just like natural sunlight) which has been proven that it can promote photosynthesis, thereby effectively promoting indoor plant growth.
1. Safety & Healthy for Your Plants
2. Large Coverage for your plants which need enough light for grow
3. Make your plants grow faster and healthier
Product Specifications:
| Part NO. | A0052 |
| LED | 2835 |
| Quantity | 120 SMD / M |
| IP Rank | IP20 |
| Color | R, Y, B, G, CW, WW, PW |
| PCB Color | White |
| CRI | CRI > 95 |
| Power ( For 5M ) | 75W ± 10% |
| Dimension | 5000 * 8 * 2.3mm |
Product Details:
01. RESISTANCE
Reflow Welding Process, Low Temperature Reflow Welding, Full and Smooth Welding, Environmental Protection and Durability.
02. 22AGW PURE COPPER WIRE
Welding is Firm, Good Overcurrent PVC Wire.
03. SOFT LIGHT WITH
Using the FPC as a Soft Substrate, Can Be Arbitrary Bending Will Not
Break, Easy to Shape.
SAFETY INFORMATION
· Please Consult an Electrician Before Doing Any Electrical Worker.
· The Strip and Its Components Cannot Be Mechanically Pressed.
· Correct Electrical Polarity Needs to Be Addressed.
· Pay Attention to ESD Precautions During Assembly.
· Installation Should Be Done by an Electrician.
STORAGE CONDITIONS
·The LEDs Should Be Kept at ≤86°F and ≤70%RH.
·When Storing the LEDs use mMisture Proof Packaging.
High CRI type, based on 90, even RA > 99
Full-spectrum light, excellent color rendition ability with typical optical parameters of Ra (avg R1~R8)=97, Ra’(avg R1~R15)=95, R9≥90, Rf (Fidelity Index)=95, Rg (Relative Gamut Index)=100, specific for high chromaticity application.
Truly full spectrum light sources, by virtue of being similar to natural daylight, must have a very high CRI be considered a true, full spectrum light source.
Apply to Most Plants: This full spectrum LED grow light produces lights of all kinds of wavelengths plants need in sprouting, growing and blossoming, just like the sun! Suitable for most plants, don’t need to think about which wavelength of lights would fit your plants, this grows light will solve this problem for you.
Wide Application: Used as plant growth supplementary lighting. Widely used in the vegetable greenhouse, vegetables, and fruits, floriculture, propagation, city farming
Product Mark Humidity : 65%
Product Ty: 12V 2835 120 2700K Test Date : 2021-06-09 17:14:24
Manufacturer: Temperature: C’
Chroma Parameters
Chro.Coor.: x=0.4626 y=0.4172 u=0.2613 v=0.3535 duv=0.0022
CCT: Tc= 2713K Dominant Wave.: 583.5nm Purity: 64.1% Centre Wave:615.5nm
Flux RGB Ratio: R=26.3%,G=72.0%,B=1.7% Peak Wave.: 635.7nm Half Width: 151.7nm
Rendering Index: Ra= 97.4 CRI=96.4
R1 =99 R2 =99 R3 =98 R4 =97 R5 =98 R6 =97 R7 =96
R8 =96 R9 =91 R10=99 R11=96 R12=86 R13=99 R14=98 R15=98
Fridelity Index(RF)=90.5 Gamut Index(Rg)=96.8
Photo Parameters
Flux: 1121.21lm Effi.: 74.21lm/W Radiant: 4318.1mW Iv: 0.0mcd
Ele. Parameters
Voltage: U=12.00V Current: I=1.2590A
Power:P=15.120W Power Factor:PF =1.000
Instrument state
Instrument:Hopoo HP8000S Integral Time:99.452ms
VDark :1077 Scan Range: 380-780nm
Dimensions:
120LEDs/M
Connect Drawing:
Waterproof Level:
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.
Packaging:
Box Size: 11 * 106 * 24cm Weight: IP20: 8KG IP65 / IP67: 11KG
High CRI strips are generally not waterproof with glue, because the glue for waterproof glue is silicone, which will slightly change the color of the light strip and change the display index of the light strip. Therefore, it is not recommended for the strip to be waterproof with IP65 glue, and the casing and extrusion glue are good choices, which can achieve the waterproof function without affecting the CRI.
The High CRI led strip can be cut like other SMD strips. Cut according to the position of the scissors.
The service life of High CRI led strip is the same as that of ordinary LED strip, which is 50,000 hours.
High CRI > 95. Color: 2600-2800K 2900-3200K 3800-4300K 5000-5500K 6000-6500K
(1) Paste Installation:
This Installation Method is Generally Used for the Waterproof Environment,
And the High-Viscosity 3m Adhesive is Attached to the Back of the Lamp Strip,
Which Can Be Directly Pasted on the Required Solid. The Surface of the Media.
(2) Snap-on Installation:
This Installation Method is Suitable for the Casing Waterproof Product.
The Product is Fixed by the Screw Transparent Buckle to Make the Installation Firmer.