Features Details Video Installation Accessories FAQ

Product Features:

◆ CRI > 90
◆ Power :8mm(10W/M) ,10mm(15W/M)
◆ DC 24V / DC12V
◆ LED Qty : 308,320LEDs/m
◆ PCB width 8mm / 10mm
◆ IP Grade : IP20 
◆ Color : 2700K / 3000K / 4000K / 6000K
◆ 3M Adhesive ,Customised services available

COB led strip Application

The COB LED strip is highly versatile and can be used in various different industries.

◆ Parking lighting 
◆ Architectural lighting
◆ Shopping mall lighting
◆ KTV & KTV bar lighting
 ◆ Holtel renovation lighting
◆ Furniture & wine cabinet lightine

Advantage: 1, 320pcs COB strip 2, 308pcs COB strip
Part NO: COB061 COB028
LED Qty: 320pcs per meter 308pcs per meter
CRI (RA) >90 >90
PCB Width IP20: 10mm 10mm
Input Voltage: DC24V DC24V
Watts: 14W 14W
Luminous Flux: 105-115LM / W 110-120LM / W
Color: 2700/3000/4000/6000K 2700/3000/4000/6000K
PCB color: White White
IP Grade: IP20 IP20
Operating temperature: .-25 to 45℃ .-25 to 45℃
Beam angle: 180 degree 180 degree
Certification: CE; RoHS CE; RoHS
Max Run: 5M 5M
Min Run: 24V   50mm 24V   45.45mm
   

Products Details:

1. New technology, SMD led chip instead of flip chip.

The traditional COB strip is soldered to the PCB with flip chip, easy to dead light, can not do drip and waterproof type, the new generation of COB strip is a combination of COB and conventional strip, soldered to the PCB board with SMD led chip, make it more solid, not easy to fall off, can do any kind of waterproof type.

2. 30% increase in luminous efficacy and uniform illumination.

The brightness of the ordinary COB strip is only 110LM/W, while the brightness of the new generation of COB strip is 30% higher than the ordinary strip 140-150LM/W. The luminous efficiency, good colour consistency, wide luminous surface, the same reliability, linear lighting effect, soft and non-blinding.

Ordinary COB LED Strip

 

v s

New upgrade COB LED Strip

3. Wide viewing Angle up to 180 degree.

 

COB led strip are 180 degree viewing angle. SMD LED Strip type is normally 120 degree viewing angle.
Put the chips on board then put Phosphor on chips let the viewing angle bigger, then it’s less dark zone

4. Excellent CCT uniformity for continuous orders.

 

With our experience engineer team. we can keep excellent CCT uniformity for continuous orders. and keep Color- Consistency: 3-Step SDCM.
Ensure your every orders same color, and continuouse provide super work for your customers.

5.  22AWG PURE COPPER WIRE

 

We pay attention to every details, the connect cable we use 22AWG pure copper wire. Always keep 3/8”stripped off the end of the LED for wiring purposes.

6. Excellent Iinear Iighting performance, Dot FREE.

   2835SMD Led Strip With Aluminum Profile:

                                                VS

   COB SMD Led Strip With Aluminum Profile:

7. Waterproof type.

Non waterproof type

Extruded Silicone waterproof

Put in tube waterproof

9. Very nice color and it’s main color temperature.

10. High CRI type, based on 90, even RA > 95

11. Dimensions:

LW-COB028 308led/m  24V 10mm 

LW-COB061 320led/m  24V 10mm
 
 
12. Connect drawing:

 

The installation:

1. This Installation Method is generally used for the Non waterproof Environment.
2. The High-viscosity 3m Adhesive is Attached to the Back of the Strip
3. It’s can be directly pasted on the Required Solid.

Easy to Use and Easy to Install

Tear Off the Adhesive Tape

Paste to Where You Need to Install

Accessories:

Free soldering Connector: 6mm; 8mm; 10mm

Middle Connector

90 cable connector

End connector

How to cut and connect it

1. Cut the COB on the cut mark.

2. Take the 3M tape out.

3. Put the strip with the connector and connect it together.

Application:

Packing:

Box Size: 43*43*35cm 100 reels per box

Weight: IP20: 12KG

5 of the Most Common Customer Questions (FAQ)

1, What is the COB LED light Strip?

The full name of the COB led strip is: Chip On Board, which is a method of directly binding the LED chips to the PCB board. 

2, Can COB LED strips be cut?

Yes, COB LED STRIP can be cut.

3, Are COB LED Strips dimmable?

Yes, it’s can be dimmable with dimmer controller.

4, What is the advantages of led strip?
  • The light-emitting chip adopts flip-chip technology, which has a cost advantage with the same number of lamp beads.
  • Shorter heat dissipation path and lower thermal resistance, less light decay.
  • No silver plating, no vulcanization risk
  • Lighting angle can reach 180 degrees
5, What is the disadvantages of led strip?
  • Poor color consistency control.

This is determined by the difference in the manufacturing process of COB LED STRIP and SMD light strips. The production process of SMD led strip is to first produce SMD lamp beads, and then split each lamp bead, and make the light bead after light separation to achieve color consistency on the same board. The COB LED STRIP is to flip the chip on the PCB board, and then drop the phosphor to achieve white light. Without the steps of light splitting, there is no way to achieve the consistency of the SMD led strip.

  • Low power

Because the chips of the COB LED STRIP are too dense, it will affect the heat dissipation, so the power cannot be made too large, at most 14W per meter, and the SMD lamp beads of the SMD led strip have brackets, which can dissipate heat and can achieve 18W.

  • Low luminous efficiency.

At present, the highest luminous efficiency of COB LED STRIP is: 120LM/W. SMD has a high-power lamp bead that can achieve 160-170LM/W. If the power requirement exceeds 120LM, you still need to choose a high-brightness SMD led strip.

  • Flip chip, the defect rate is higher than that of SMD led stripwhen making waterproof led strip.