Product Description:
This RF Mini RGB controller adopted the advanced computer control chip. Controlled by 433Mhz wireless remote.Its mainly used to controlled all kinds of constant voltage led lights,such as:LED source, LED strips,led wall washer,wall Glass curtain lights,etc.It integrated with low cost,easy connection,simple manipulation and others advantages.User can choose the mode of fade, strobe,Blasting flash,flicker,and other Static color model. What’s more, this controller have the characteristics of small volume, easy to carry,etc, its popular amount the many markets.
Technical Parameters:
- Working temperature：-20-60℃
- Input voltage：DC5-24V
- Output：3 circuit
- Connection mode：Common anode
- controller size：L40.0×W12.0×H5mm
- controller size：L85.9×W39.6×H6.9mm
- RF frequency：433.92Mhz
- Net weight：35g
- Gross weight：40g
- Static power consumption：<0.5W
- Output current：<2A*3CH(each circuit)
- Output power： 5V:<30W, 12V:<72W
External dimension:
（controller size )
（Remote size）
Connection description:
Power input :5.5×2.1mm female DC connector
Signal output port:2.54mm female 4 pins connector
Direction for use:
1.The match code instructions:
Press the key 
within 4 seconds when power the controller.Each time powered the controller, just can be match code for one time. If want to match code again, then need to cut off the power , connected to the power again.
2.Remote control function instructions:
There are 10 buttons on the remote , the functions are as below:
Turn ON/OFF the controller. Press this key within 4 seconds to match code when powered the controller.
Auto play key. on any state to press this button , the controller will be take turns to play each dynamic mode by cycle for 3 times.
In dynamic mode, press this key switch to static mode for the first time,the color will backword/forward to the next color when press each time.
In dynamic mode, press this key switch to static mode for the first time,the brightness will increase/decrease for one level when press each time,total 5 level.
In static mode, press this key switch to dynamic mode for the first time,switch to the next backward/forward mode when press each time.
In static mode, press this key switch to dynamic mode,the changing speed will increase/decrease for one level when press each time,total 10 level.
3、This controller’s sequence is +RGB order,in case of other sequence(+BRG/+GRB) will appear in the other effect. Based on sequence of + RGB, pattern are as follows:
|
Dynamic model |
NO. | Mode | NO. | Mode | NO. | Mode |
| 1 | 7 color fade | 8 | Purple fade in and fade out | 15 | Blue blasting flash | |
| 2 | 3 color fade in and fade out | 9 | Blue fade in and fade out | 16 | Purple blasting flash | |
| 3 | 7 color fade in and fade out | 10 | 3 Color Jump | 17 | Yellow blasting flash | |
| 4 | White fade in and fade out | 11 | 6 color Jump | 18 | White blasting flash | |
| 5 | Green fade in and fade out | 12 | 3 color flash | 19 | 3 color blasting flash | |
| 6 | Yellow fade in and fade out | 13 | Red blasting flash | |||
| 7 | Red fade in and fade out | 14 | Green blasting flash |
|
Static mode |
NO. | Mode | NO. | Mode | NO. | Mode |
| 1 | Red | 8 | Milk-white | 15 | Blue-purple | |
| 2 | Green | 9 | Dark yellow | 16 | Yellow-white | |
| 3 | Blue | 10 | Sky blue | 17 | yellow | |
| 4 | White | 11 | Brown | 18 | cyan | |
| 5 | Orange | 12 | Pink-white | 19 | purple |
Typical Applications:
Cautions
- This products Input voltage is DC5-24V,other input voltage are not allowed.
- Lead wire should be connected correctly,according to the wire color and the connecting diagram offers.
- Overload are prohibite