Rf Touch Remote Single Color Controller

● Model number：LW-RFTC-01

● Stableremote,long remote distance.

● Novel,fashionable,unique,noble appearance,High sensitivity with good feeling.

● The touching ring is sensitive, the color brightnessis Very intuitive appear in the touch ring,user can choose the color brightness they prefer Beside, this remote can be touch single point or to touch continually to realize choosing the color temperature.

● Low power consumption, long lifespan, can be touch infinite times , overcome the shortcomings of traditional key short lifespan.

● With auto Restingfunction,it will be turn into Resting stateafter 20 seconds with touching the remote control,this function can Realize saving electricity and prolong the battery lifespan.

● With short circuit automatic detection and protection function, it will automatically shut down outputwhen short-circuit occurred, and lights flashing.Automatic recovery after 10 s output, or the user can re-install the electricityto recover the output .

Introduction:

This Rf Touch Remote single Color dimmer is one of a newly design LED Touch remote controller of Our factory. Using the latest capacitance touch technology and unique appearance design，Looks Simple, intuitive ,it realize of the effect of remote dimming control.This controller provide three channels single color output in parallel , means these three channels can be adjusted at the same time. This controller is integrated with the advantage of easy connection, stable Rf transmission just with little Interference, and long lifespan.This controller is with short circuit protection function,when meet short circuit, its green indicating light will be twinkling in a fixed frequency to indicate the user. what’s more, Its with automatically restore function after short circuit protection,this humanized design can make the user experience another different sense

Technical parameters:

Controller：

Working temperature：-20℃~+60℃
Supply Voltage：DC5V, 12V, 24V available（Please specify the voltage when place order）
Output：3 single color channels N-MOSDrain open output in parallel
Connection mode：common anode
controller dimension：L83×W79×H33 mm
Package size：L205×W134×H47mm
Net Weight：227g
Gross Weight：379g
Static power consumption：<1W
Output current：<18A(each channel)
Output power：5V:<90W, 12V:<216W, 24V:<432W

Romoter

Working temperature：-30℃~+60℃
Power supply mode：3pcs NO.7 Battery
Supply voltage：3V
　 Static power consumption：<0.09mW
Remote-controlled distance：>20M

External dimension:

Controller

Remoter

Connection lnstruction:

DC+： For power input +（power supply voltage DC12v-24v）

DC-： For power input –

V+： For Load Common anode

V-： Output cathode, three channel in parallel

Power： Red indicating light is for power light，when the power on it will be turn on.

Receiver： Green indicating light, normally it will be in the state of OFF,it will be twinkle

when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be twinkle in a Fixed frequency to indicate the user.

main characteristic:

Novel,fashionable,unique,noble appearance,High sensitivity with good feeling.
The touching ring is sensitive, the color brightnessis Very intuitive appear in the touch ring,user can choose the color brightness they prefer Beside, this remote can be touch single point or to touch continually to realize choosing the color temperature.
Low power consumption, long lifespan, can be touch infinite times , overcome the shortcomings of traditional key short lifespan.
With auto Restingfunction,it will be turn into Resting stateafter 20 seconds with touching the remote control,this function can Realize saving electricity and prolong the battery lifespan.
With short circuit automatic detection and protection function, it will automatically shut down outputwhen short-circuit occurred, and lights flashing.Automatic recovery after 10 s output, or the user can re-install the electricityto recover the output .
Stableremote,long remote distance.

Remoter Function instruction

Button	Function
	The left one is OFF button,the right one is ON button, At any time just need to gently touch this two buttons,than can make it open or closed.
	The above key are 100% brightness hotkey, touch it gently, the brightness will reach at 100% brightness output. The above key are 2% brightness hotkey, touch it gently, the brightness will reach at 2% brightness output.
	Touching ring is as the chart on right shows,，Touch the are outside of this circle is the dead space，without button function；To slide the touching ring by clockwise ,the light will be become darker; To slide the touching ring by Counterclockwise the Cold light become brighter
	Brightness+ key，Increase output luminance.
	Brightness- key，Reduce output luminance.

Typical Applications:

Caution

1、Supply voltage of this product is DC12V~24V, never connect to others or AC220V.

2、Lead wire should be connected correctly according to grade that connecting diagram offers.；

3、This product can not be overloaded。